Mefuta e fapa-fapaneng ea boholo bo tiileng ba Tungsten Carbide Rods e behiloe le ho hloekisoa
Tlhaloso e Khutšoanyane:
Lits'ebetso
1. 100% thepa e tala
2. Le ka tieo mamello tekanyo taolo
3. Excellent apara ho hanyetsa & phahameng toughness
4. E-ba le botsitso bo botle haholo ba mocheso le lik'hemik'hale
5. Anti-deformation & deflection
6. Ts'ebetso e khethehileng ea Hot Isostatic Press (HIP).
7. Amohela lisebelisoa tse tsoetseng pele tsa extrusion
8. Lithupa tse se nang letho le tse phethiloeng tsa tungsten carbide li fumaneha
9. E ka fihla holim'a phello ea seipone ka mor'a ho sila le ho bentša ho nepahetseng
10. Taelo e hlophisitsoeng e amoheloa.
Kopo
Bakeng sa ho etsa li-drill bits, li-end-mills, li-reamers
Taolo ea Boleng
1. Lisebelisoa tsohle tse tala li lekoa ho latela boima, boima le TRS 'me li theohile ho tloha sebakeng se phahameng sa 1.2m pele li sebelisoa.
2. Karolo e 'ngoe le e' ngoe ea sehlahisoa e feta nakong ea ts'ebetso le tlhahlobo ea ho qetela
3. Sehlopha se seng le se seng sa sehlahisoa se ka saloa morao
Mephato Likarolo le Tšebeliso
| MPHATO | Likahare tsa Cobalt | Boholo ba lijo-thollo | Botenya | Ho thatafala | TRS |
| (%) | μ | g/cm3 | HRA | N/mm2 | |
| YG6X | 6 | 0.8 | 14.9 | 91.5 | 3400 |
| YL10.2 | 10 | 0.6 | 14.5 | 91.8 | 4000 |
| YG15 | 15 | 1.2 | 14 | 87.6 | 3500 |
| XU30 | 12 | 0.4 | 14.1 | 92.5 | 4000 |
YG6X : e loketse bakeng sa tšepe ea tšepe e pholileng, ho sila ka tšepe ea tšepe, tšepe e bohlooho, tšepe e sa keneleng mocheso ea likarolo tse nyane le tse mahareng tsa ho qetela ka lebelo le phahameng, li entsoe ka reamer, alloy ea aluminium, koporo e khubelu, boronse. , polasetiki ea khetho.
YL10.2: Haholo-holo e sebelisetsoang ho sebetsa tšepe, tšepe e entsoeng ka tšepe, tšepe e sa hloekang, tšepe e sa keneleng mocheso, li-alloys tse thehiloeng ho nickel le titanium le lisebelisoa tse ling, hangata li etsoa ka mochini o sothang, leloala la ho qetela, pompong, lisebelisoa tse tloaelehileng tse kang ho cheka lithunya. lisebelisoa.
YG15: E loketse tlhahiso e akaretsang ea litempe le lisebelisoa, joalo ka linale tse khubelu, punch, die le lisebelisoa tse ling.
XU30: E loketse ho itšeha ka lebelo le phahameng la tšepe ea hlobo (haholo-holo e loketseng mocheso o tšoaroang ka tšepe ≤ HRC50), li-alloys tse nang le mocheso o phahameng, tšepe e sa hloekang, li-plastiki tse matlafalitsoeng ka khalase, joalo-joalo E khothalletsoa ka ho khetheha bakeng sa ho etsa lithipa tse phahameng tsa gloss.
| OD | Mamello ea OD e se nang letho | Bolelele | Blanks Length tolerance |
| mm | mm | mm | mm |
| 1.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 2.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 3.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 4.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 5.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 6.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 7.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 8.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 9.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| 10.0 | +0,2~+0,5 | 330 | 0~+5.0 |
| Ntle le litlhaloso tse boletsoeng ka holimo, litlhaloso tse khethehileng li ka fanoa ho latela litlhoko tsa hau. | |||
LBH
Ee, re ka u etsetsa tlhophiso joalo ka litlhoko tsa hau.
Ka kakaretso ke matsatsi a 3 ~ 5 haeba thepa e le teng;kapa ke matsatsi a 10-25 haeba thepa e le sieo, ho itšetlehile ka bongata ba taelo.
Ka kakaretso ha re fane ka mehlala ea mahala.Empa re ka fokotsa litšenyehelo tsa sampole ho tsoa ho liodara tsa hau tse ngata.
Kamehla sampuli ea pele ho tlhahiso pele ho tlhahiso ea bongata;Kamehla tlhahlobo ea ho qetela pele e romelloa.
